Monitor: On Master Tenant

The ‘Monitor’ section allows the administrator to monitor all Extensions, Apps, Trunks and Live Calls in real-time.

Extensions

01-monitor-page-master.png

Monitored Extensions are displayed in real-time with the following details:

  • Select all (6.7.5)

Select All checkbox was added for more convenient management of all devices registering to the same system/tenant. Clicking the checkbox will automatically select all devices that are currently online.

  • Name

Displays the name of the Extension

(E.g. Peter Doyle)

(Display)

  • Extension

Displays the protocol used by the Extension and Extension number

(E.g. SIP/2002)

(Display)

  • IP address

Displays the IP address port that a UAD/Phone is registered to and additionally shows which transport is used (TLS, UDP, TCP, WS, or WSS)

(E.g. 192.168.1.1:5060 (UDP))

NOTE: If you click an IP address, it will open up a new window showing the phone’s web interface, if there is one enabled.

  • Status

Displays the status of UAD/Phone network

(E.g. Online/Offline)

  • User Agent

Displays the UAD/Phone Brand/Version

(E.g. Yealink SIP-T41S)

  • DND

Displays whether DND is applied

  • On Call

Displays whether the user is participating in a call at this moment

If the user is on call picture of a headset will be shown, otherwise, this field will be blank.

TIP: Certain call actions (such as transferring calls, hanging up, etc.) can be performed on active calls as well.

02-monitor-page-searchbar.png
  • Refresh

Select the time interval in seconds at which data should be refreshed

(E.g. To refresh every ten seconds, select ‘10 sec’ from the drop-down list.)

  • Tenant

Select the specific Tenant that is going to be monitored

(E.g. TestTenant)

  • Status

Sort Extensions based on their network status (ALL, Online, Offline)

(E.g. Select ‘Online’/’Offline’ to see only online or offline Extensions. Select ‘ALL’ to list all the Extensions on a Tenant.)

  • Search

Type a specific Extension name, Extension number, User-Agent, or IP address and have the data filtered accordingly

(E.g. TestTenant)

.

Actions

03-action-bar.png
  • Monitor
    04-monitor-call-options.png

Select one of the active conversations

(E.g. Users can one of the active conversations by clicking the checkbox next to the Extension, and providing the Extension number that should listen to the active conversation.)

NOTE: Users may listen to active conversations by dialing *199 + $EXTENSION number as well. Please note that regardless of which method is used to listen to calls, the listening service has to be enabled in Enhanced Services of the Extension that listens to the call. To enable this option, please navigate to ‘Enhanced Services’ -> ‘Call Monitoring’.

In case there is a following voice message: “The vertical service dialed is not enabled. Please contact your administrator.”, it means that this enhanced service is not enabled.

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select this button and type ‘1005’ into the pop-up window. Extension ‘1005’ will ring and once the handset is picked up, the active conversation will be heard.)

  • Transfer

Transfer a party from the active conversation to a different Destination

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select one Extension (e.g. ‘1000’) under ‘Channels’ and click this button. Type ‘1005’ in the pop-up window. Extension ‘1001’ will be transferred to the Extension ‘1005’)

  • Hangup

Hang up the active conversation

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select one Extension (e.g. ‘1000’) under ‘Channels’ and click this button. The conversation between these two Extensions will be terminated.)

  • Reboot

By selecting Extension and clicking ‘Reboot’, the phone on which the selected extension is registered will reboot.

NOTE: This doesn’t work for all types of phones. Some phones need to be provisioned in order for this to work.

Apps

05-apps.png

The ‘Apps’ page displays all currently registered apps. The page behaves similarly to ‘Monitor’ -> ‘Extensions’ with the exception of no rows being displayed for Extensions that do not have any apps present. This option is useful because it gives the opportunity to preview how many gloCOM editions are online.

Monitored Apps are displayed in real-time with the following details:

  • Name

Displays the name of the Extension

(E.g. TestApp)

  • Extension

Displays the protocol used by the app and Extension number

(E.g. SIP/2002)

  • IP address

Displays the IP address:port that a UAD/Phone is registered to

(E.g. 192.168.1.1:5060)

  • App

Displays the application name and version

  • Edition

Displays the app edition

  • On Call

Displays whether the user is participating in a call at this moment

(E.g. If the user is on a call, the picture of a headset will be shown, otherwise, this field will be blank.)

NOTE: Certain call actions (such as transferring calls, hanging up, etc.) can be performed on active calls as well.

Search

  • Refresh

Select the time interval in seconds at which data should be refreshed

(E.g. To refresh every ten seconds, select ‘10 sec’ from the drop-down list.)

  • Tenant

Select the specific Tenant that is going to be monitored

(E.g. TestTenant)

  • Edition

Sort Extensions based on their edition

(E.g. ‘Office’, ‘Business’, ‘Agent’, ‘Supervisor’)

  • Search

Type a specific Name, Extension, or App and have the data filtered accordingly

(E.g. TestTenant)

.

Actions

  • Monitor
    04-monitor-call-options.png

Select one of the active conversations

(E.g. Users can one of the active conversations by clicking the checkbox next to the Extension, and providing the Extension number that should listen to the active conversation.)

NOTE: Users may listen to active conversations by dialing *199 + $EXTENSION number as well. Please note that regardless of which method is used to listen to calls, the listening service has to be enabled in Enhanced Services of the Extension that listens to the call. To enable this option, please navigate to ‘Enhanced Services’ -> ‘Call Monitoring’.

In case there is a following voice message: “The vertical service dialed is not enabled. Please contact your administrator.”, it means that this enhanced service is not enabled.

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select this button and type ‘1005’ into the pop-up window. Extension ‘1005’ will ring and once the handset is picked up, the active conversation will be heard.)

  • Transfer

Transfer a party from the active conversation to a different Destination

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select one Extension (e.g. ‘1000’) under ‘Channels’ and click this button. Type ‘1005’ in the pop-up window. Extension ‘1001’ will be transferred to the Extension ‘1005’)

  • Hangup

Hang up the active conversation

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select one Extension (e.g. ‘1000’) under ‘Channels’ and click this button. The conversation between these two Extensions will be terminated.)

Trunks

06-monitor-trunks.png

Monitored Trunks are displayed in real-time with the following details:

  • Trunk:

Displays the Trunk name

  • IP address:

Displays the provider’s IP address

(E.g. 203.196.128.5)

  • Status:

Displays the Trunk status (‘Online’/’Offline’)

(E.g. If the ‘Qualify’ Trunk option is empty, ‘Unmonitored’ is displayed here. Otherwise, ‘(e) ok (159ms)’ is displayed.)

NOTE: Please set the ‘Qualify’ = ‘2500’ in the Trunk settings to see its status.

Search

07-search-filter.png
  • Refresh

Select the time interval in seconds at which data should be refreshed

(E.g. To refresh every ten seconds, select ‘10 sec’ from the drop-down list.)

  • Protocol

Select a Trunk from the drop-down list based on the protocol

(E.g. SIP)

  • Status

Sort Trunks based on their network status (ALL, Online, Offline)

(E.g. Select ‘Online’/’Offline’ to see only online or offline Extensions. Select ‘ALL’ to list all the Extensions on a Tenant.)

Live Calls

08-livecalls.png

Monitored Live Calls are displayed in real-time with the following details:

  • From

Displays the caller’s Extension Name (or CallerID) and Extension number

(E.g. TestExtension (101))

  • To

Displays the call receiver’s Extension name (or CallerID) and Extension number

(E.g. TestExtension (102))

  • Call Duration

Displays the duration of the call

Search

  • Refresh

Select the time interval in seconds at which data should be refreshed

(E.g. To refresh every ten seconds, select ‘10 sec’ from the drop-down list.)

Actions

  • Hangup

Hang up the active conversation

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select one Extension (e.g. ‘1000’) under ‘Channels’ and click this button. The conversation between these two Extensions will be terminated.)

Monitor: Tenant Level

Extensions

09-monitor-tenant-page.png

Monitored Extensions are displayed in real-time with the following details:

  • Select all (6.7.5)

Select All checkbox was added for more convenient management of all of the devices registering to the same system/tenant. Clicking the checkbox will automatically select all devices that are currently online.

  • Name

Displays the name of the Extension

(E.g. Peter Doyle)

  • Extension

Displays the protocol used by the Extension and Extension number

(E.g. SIP/2002)

  • IP address

Displays the IP address port that a UAD/Phone is registered to and additionally shows which transport is used (TLS, UDP, TCP, WS, or WSS)

(E.g. 192.168.1.1:5060 (UDP))

NOTE: If you click an IP address, it will open up a new window showing the phone’s web interface, if there is one enabled.

  • Status

Displays the status of UAD/Phone network

(E.g. Online/Offline)

  • User Agent

Displays the UAD/Phone Brand/Version

(E.g. Yealink SIP-T41S)

  • DND

Displays whether DND is applied

  • On Call

Displays whether the user is participating in a call at this moment

If the user is on call picture of a headset will be shown, otherwise, this field will be blank.

TIP: Certain call actions (such as transferring calls, hanging up, etc.) can be performed on active calls as well.

Search

  • Refresh

Select the time interval in seconds at which data should be refreshed

(E.g. To refresh every ten seconds, select ‘10 sec’ from the drop-down list.)

  • Status

Sort Extensions based on their network status (ALL, Online, Offline)

(E.g. Select ‘Online’/’Offline’ to see only online or offline Extensions. Select ‘ALL’ to list all the Extensions on a Tenant.)

  • Search

Type a specific Extension name, Extension number, User-Agent, or IP address and have the data filtered accordingly

(E.g. TestTenant)

.

Actions

  • Transfer

Transfer a party from the active conversation to a different Destination

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select one Extension (e.g. ‘1000’) under ‘Channels’ and click this button. Type ‘1005’ in the pop-up window. Extension ‘1001’ will be transferred to the Extension ‘1005’)

  • Hangup

Hang up the active conversation

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select one Extension (e.g. ‘1000’) under ‘Channels’ and click this button. The conversation between these two Extensions will be terminated.)

  • Reboot

By selecting Extension and clicking ‘Reboot’, the phone on which the selected extension is registered will reboot.

NOTE: This doesn’t work for all types of phones. Some phones need to be provisioned in order for this to work.

(Button)

Apps

10-apps-page.png

The ‘Apps’ page displays all currently registered apps. The page behaves similarly to ‘Monitor’ -> ‘Extensions’ with the exception of no rows being displayed for Extensions that do not have any apps present. This option is useful because it gives the opportunity to preview how many gloCOM editions are online.

Monitored Apps are displayed in real-time with the following details:

  • Name

Displays the name of the Extension

(E.g. TestApp)

  • Extension

Displays the protocol used by the app and Extension number

(E.g. SIP/2002)

  • IP address

Displays the IP address:port that a UAD/Phone is registered to

(E.g. 192.168.1.1:5060)

  • App

Displays the application name and version

  • Edition

Displays the app edition

  • On Call

Displays whether the user is participating in a call at this moment

(E.g. If the user is on a call, the picture of a headset will be shown, otherwise, this field will be blank.)

NOTE: Certain call actions (such as transferring calls, hanging up, etc.) can be performed on active calls as well.

Search

  • Refresh

Select the time interval in seconds at which data should be refreshed

(E.g. To refresh every ten seconds, select ‘10 sec’ from the drop-down list.)

  • Edition

Sort Extensions based on their edition

(E.g. ‘Office’, ‘Business’, ‘Agent’, ‘Supervisor’

  • Search

Type a specific Name, Extension, or App and have the data filtered accordingly

(E.g. TestTenant)

Actions

  • Transfer

Transfer a party from the active conversation to a different Destination

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select one Extension (e.g. ‘1000’) under ‘Channels’ and click this button. Type ‘1005’ in the pop-up window. Extension ‘1001’ will be transferred to the Extension ‘1005’)

  • Hangup

Hang up the active conversation

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select one Extension (e.g. ‘1000’) under ‘Channels’ and click this button. The conversation between these two Extensions will be terminated.)

Live Calls

11-livecalls.png

Monitored Live Calls are displayed in real-time with the following details:

  • From

Displays the caller’s Extension Name (or CallerID) and Extension number

(E.g. TestExtension (101))

  • To

Displays the call receiver’s Extension name (or CallerID) and Extension number

(E.g. TestExtension (102))

  • Call Duration

Displays the duration of the call

(Display)

Search

  • Refresh

Select the time interval in seconds at which data should be refreshed

(E.g. To refresh every ten seconds, select ‘10 sec’ from the drop-down list.)

Actions

  • Hangup

Hang up the active conversation

(E.g. Extensions ‘1000’ and ‘1001’ are in a conversation. Select one Extension (e.g. ‘1000’) under ‘Channels’ and click this button. The conversation between these two Extensions will be terminated.)

Scroll to Top